ML-LPK-S Series
•7” Color TFT LCD
•Easy operation with touch pad
•Data saving on Micro SD card.
•Support user’s measuring screen editor.
•Panel purpose(option), Panel size: 219×119mm
ML-LPK-S Series
The precise indicator to estimate displacement with 16chs / Terminals, external and internal diameters squareness
-It can be connected from minimal 1 to maximal 16 sensors (LVDT, HBT)
-The function of group association (+,-, /, x, avr, max, min, mid)
-The estimation for the external and internal diameter.
Micro SD: DATA Save and Back-up Function
Compact Size, Panel type indicator with 1~16chs
37" TFT LCD TOUCH DISPLAY
Association ( +, - , / , X , M-m , Avr , Max , Min , Mid)
RS232C output , I/O interface
OK/NG Quantity-counting function
16BIT AD High precise esimation is available
Three languages are available (english, chinese and korean)
-ML-LPK-S SERIES :-It can be connected from minimal 1 to maximal 16 sensors (LVDT, HBT)
-The function of group association (+,-, /, x, avr, max, min, mid)
-The estimation for the external and internal diameter
SPECIFICATION
Model | ML-LPK-S Series |
Use | Stastics |
Association | , - , average, max-min |
Channel | 1-4ch |
Sampling data | 500 times a second |
Resolution | 1/1000mm or 1/100 (Option: 1/10000mm) |
Indicator | 7 TFT COLOR LCD TOUCH |
Size(mm) W x H x D | 220x120x192 |
Power Input | AC100 ~ 220V 50Hz/60Hz |
Data communication | RS232C |
I/O port | 6 inputs / 6 outputs |
Compatible Probes | DP-S4 series, DP-10 series, DP-25, other companies HBT probes / Option: LVDT or other analog sensors, Linear gauges |
● The calibration for Hard disc flatness
●The calibration of Thickness and Flatness
●The calibration of Thickness and Flatness
● The multiple callibration for auto mobile devices using contact internal diameter guage
Model size
Order Code
ML-LPK SERIES | ||||||
The precise indicator to estimate displacement with 16chs (LVDT, HBT) Association ( +, - , / , X , M-m , Avr , Max , Min , Mid) The estimatioin on Flatness, Displacement , Internal and external diameters Converting monitor to PC by taking advantage of Any pc program 7" TFT LCD TOUCH DISPLAY MICRO SD Data back-up/Saving function D-SUB 15PIN I/O INPUT/OUTPUT FUNCTION ( Input : 6points , Output : 6points ) Three languages are available (english, chinese and korean) Sensor's forward and backward direction is available PRESET function revision function RS232C |
Circuitity ( NPN Output specification )
INPUT ( START ):INPUT CURRENT : MAX 10mA
OUTPUT ( OK, NG, READY ): VOLTAGE : MAX 30V CURRENT : MAX 300mA
Transmission specification | |||
Item | Specification | ||
∙ Interface | RS232C | ||
∙ Port | D-Sub 9pin RS232C ⇨ 1ch | ||
∙synchronization | Asynchronous | ||
∙Composition | DATA BIT ⇨ 8 Bit | ||
PARITY BIT ⇨ None | |||
STOP BIT ⇨ 1 Bit | |||
∙ Transmission | ASCII/HEX | ||
115200/57600/38400/19200/9600 bps | |||
the mode of output: Binary | |||
STX | STATUS | MEASURING DATA | ETX |
( 1 Byte ) | ( 1 Byte ) | ( n Byte ) | (1 Byte) |
( n = Transmit Data Q'ty x 2 ) |
the mode of output : ASCII | |||||||||||
Byte | 1 | 2 | 1 | 2 | 1 | 5*n+(n-1) | 1 | 1 | 2 | 1 | 1 |
Char | ENQ | Start Data Num. |
, | End Data Num. |
, | Data | , | ETX | @@ | CR | LF |
The estimation : either Ok signals or more than 2 digits of output | ||||||||||||
1 | 2 | 1 | 2 | 1 | 5 | 1 | 5 | 1 | 1 | 2 | 1 | 1 |
ENQ | OK | , | 2 | , | 43 | , | -25 | , | ETX | @@ | CR | LF |
input/output specification ( D-SUB 15PIN ) | ||||
pin numbers | name | direction | explaination | |
1 | NCOMMON | 0 V | GND terminal | |
2 | PCOMMON | +24V | 24V terminal | |
3 | Model 2 | input | ||
4 | Model 1 | input | ||
5 | Model 0 | input | ||
6 | Recall | input | ||
7 | ZERO | input | H/L | zero |
8 | START | input | H/L | starting signal |
9 | output | |||
10 | READY | ouput | H/L | ready signal |
11 | output | |||
12 | output | |||
13 | NG | output | H/L | NG signal |
14 | OK | ouput | H/L | OK signal |
※ it is modifiable for imput/output number through set-up |